One of the benefits of Python is the ease with which interfacing is possible. In this tutorial we’ll look at interfacing the standard GNU ping command to the simulator. Using Python we can ping our DUT with fewer than 50 lines of code.
For the impatient this tutorial is provided as an example with cocotb. You can run this example from a fresh checkout:
cd examples/ping_tun_tap/tests sudo make
To create a virtual interface the test either needs root permissions or
In order to achieve this we need to capture the packets that are created by ping, drive them onto the pins of our DUT in simulation, monitor the output of the DUT and send any responses back to the ping process.
Linux has a TUN/TAP virtual network device which we can use for this purpose, allowing ping to run unmodified and unaware that it is communicating with our simulation rather than a remote network endpoint.
First of all we need to work out how to create a virtual interface. Python has a huge developer base and a quick search of the web reveals a TUN example that looks like an ideal starting point for our testbench. Using this example we write a function that will create our virtual interface:
import subprocess, fcntl, struct def create_tun(name="tun0", ip="192.168.255.1"): TUNSETIFF = 0x400454ca TUNSETOWNER = TUNSETIFF + 2 IFF_TUN = 0x0001 IFF_NO_PI = 0x1000 tun = open('/dev/net/tun', 'r+b') ifr = struct.pack('16sH', name, IFF_TUN | IFF_NO_PI) fcntl.ioctl(tun, TUNSETIFF, ifr) fcntl.ioctl(tun, TUNSETOWNER, 1000) subprocess.check_call('ifconfig tun0 %s up pointopoint 192.168.255.2 up' % ip, shell=True) return tun
Now we can get started on the actual test. First of all we’ll create a clock
signal and connect up the
Avalon driver and
monitor to the DUT. To help debug
the testbench we’ll enable verbose debug on the drivers and monitors by setting
the log level to
import cocotb from cocotb.clock import Clock from cocotb.drivers.avalon import AvalonSTPkts as AvalonSTDriver from cocotb.monitors.avalon import AvalonSTPkts as AvalonSTMonitor @cocotb.test() def tun_tap_example_test(dut): cocotb.fork(Clock(dut.clk, 5000).start()) stream_in = AvalonSTDriver(dut, "stream_in", dut.clk) stream_out = AvalonSTMonitor(dut, "stream_out", dut.clk) # Enable verbose logging on the streaming interfaces stream_in.log.setLevel(logging.DEBUG) stream_out.log.setLevel(logging.DEBUG)
# Reset the DUT dut._log.debug("Resetting DUT") dut.reset_n <= 0 stream_in.bus.valid <= 0 yield Timer(10, units='ns') yield RisingEdge(dut.clk) dut.reset_n <= 1 dut.stream_out_ready <= 1
The rest of the test becomes fairly straightforward. We create our TUN
interface using our function defined previously. We’ll also use the
subprocess module to actually start the ping command.
We then wait for a packet by calling a blocking read call on the TUN file
descriptor and simply append that to the queue on the driver. We wait for
a packet to arrive on the monitor by yielding on
wait_for_recv() and then
write the received packet back to the TUN file descriptor.
# Create our interface (destroyed at the end of the test) tun = create_tun() fd = tun.fileno() # Kick off a ping... subprocess.check_call('ping -c 5 192.168.255.2 &', shell=True) # Respond to 5 pings, then quit for i in range(5): cocotb.log.info("Waiting for packets on tun interface") packet = os.read(fd, 2048) cocotb.log.info("Received a packet!") stream_in.append(packet) result = yield stream_out.wait_for_recv() os.write(fd, str(result))
That’s it - simple!
This example is deliberately simplistic to focus on the fundamentals of interfacing to the simulator using TUN/TAP. As an exercise for the reader a useful addition would be to make the file descriptor non-blocking and spawn out separate coroutines for the monitor / driver, thus decoupling the sending and receiving of packets.