Extending existing build flows

In order to extend an existing build flow for use with cocotb, this chapter shows the minimum settings to be done.

Note

These instructions are an unsupported alternative to using the Makefiles provided by cocotb.

For all simulators, the following environment variables need to be set:

• Define LIBPYTHON_LOC using $(cocotb-config --libpython).

• Define MODULE with the name of the Python module containing your testcases.

See the sections below for additional settings to be done, depending on the simulator.

Icarus Verilog

• Call the vvp executable with the options -M $(shell cocotb-config --lib-dir) -m $(shell cocotb-config --lib-name vpi icarus).

Verilator

• Extend the call to verilator with these options:

  --vpi --public-flat-rw --prefix Vtop \
  -LDFLAGS "-Wl,-rpath,$(shell cocotb-config --lib-dir) \
      -L$(shell cocotb-config --lib-dir) \
      -lcocotbvpi_verilator -lgpi -lcocotb -lgpilog -lcocotbutils" \
  $(cocotb-config --share)/lib/verilator/verilator.cpp
  

• Run Verilator’s makefile as follows: CPPFLAGS="-std=c++11" make -f Vtop.mk

Synopsys VCS

• Create a file pli.tab with the content acc+=rw,wn:* (or equivalent) to allow cocotb to access values in the design.

• Extend the vcs call with the options +vpi -P pli.tab -load $(shell cocotb-config --lib-name-path vpi vcs).

Aldec Riviera-PRO

• The alog call needs the -pli libgpi option set.

• The asim call needs the +access +w option set to allow cocotb to access values in the design.

Design with a VHDL ToplevelDesign with a (System)Verilog Toplevel

For a design with a VHDL toplevel, call the asim executable with the option -pli $(shell cocotb-config --lib-name-path vpi riviera).

Set the GPI_EXTRA variable to $(shell cocotb-config --lib-name-path vhpi riviera):cocotbvhpi_entry_point if there are also (System)Verilog modules in the design.

Aldec Active-HDL

• The asim call needs the +access +w option set to allow cocotb to access values in the design.

Design with a VHDL ToplevelDesign with a (System)Verilog Toplevel

For a design with a VHDL toplevel, call the asim executable with the option -pli $(shell cocotb-config --lib-name-path vpi activehdl).

Set the GPI_EXTRA variable to $(shell cocotb-config --lib-name-path vhpi activehdl):cocotbvhpi_entry_point if there are also (System)Verilog modules in the design.

Mentor/Siemens EDA Questa and Modelsim

Design with a VHDL ToplevelDesign with a (System)Verilog Toplevel

For a design with a VHDL toplevel, call the vsim executable with the option -foreign "cocotb_init $(shell cocotb-config --lib-name-path fli questa)".

Set the GPI_EXTRA variable to $(shell cocotb-config --lib-name-path vpi questa):cocotbvpi_entry_point if there are also (System)Verilog modules in the design.

Cadence Incisive and Xcelium

• The xrun call (or xmelab in multi-step mode) needs the -access +rwc (or equivalent, e.g. -afile afile) option set to allow cocotb to access values in the design.

Design with a VHDL ToplevelDesign with a (System)Verilog Toplevel

For a design with a VHDL toplevel, call the xrun or xmelab executable with the option -loadvpi $(shell cocotb-config --lib-name-path vpi xcelium):vlog_startup_routines_bootstrap.

Set the GPI_EXTRA variable to $(shell cocotb-config --lib-name-path vhpi xcelium):cocotbvhpi_entry_point. This is because directly loading the VHPI library causes an error in Xcelium, so always load the VPI library and supply VHPI via GPI_EXTRA.

GHDL

• Extend the ghdl -r call with the option --vpi=$(shell cocotb-config --lib-name-path vpi ghdl).

Tachyon DA CVC

• Extend the cvc64 call with the option +interp +acc+2 +loadvpi=$(shell cocotb-config --lib-name-path vpi cvc):vlog_startup_routines_bootstrap.