Build options and Environment Variables

Make System

Makefiles are provided for a variety of simulators in cocotb/share/makefiles/simulators. The common Makefile cocotb/share/makefiles/Makefile.sim includes the appropriate simulator Makefile based on the contents of the SIM variable.

Make Targets

Makefiles defines the targets regression and sim, the default target is sim.

Both rules create a results file with the name taken from COCOTB_RESULTS_FILE, defaulting to results.xml. This file is a xUnit-compatible output file suitable for use with e.g. Jenkins. The sim targets unconditionally re-runs the simulator whereas the regression target only re-builds if any dependencies have changed.

In addition, the target clean can be used to remove build and simulation artifacts. The target help lists these available targets and the variables described below.

Make Phases

Typically the makefiles provided with cocotb for various simulators use a separate compile and run target. This allows for a rapid re-running of a simulator if none of the RTL source files have changed and therefore the simulator does not need to recompile the RTL.

Variables

The following sections document environment variables and makefile variables according to their owner/consumer.

Of the environment variables, only MODULE is mandatory to be set (typically done in a makefile or run script), all others are optional.

Cocotb

TOPLEVEL

Use this to indicate the instance in the hierarchy to use as the DUT. If this isn’t defined then the first root instance is used. Leading and trailing whitespace are automatically discarded.

The DUT is available in cocotb tests as a Python object at cocotb.top; and is also passed to all cocotb tests as the first and only parameter.

Changed in version 1.6.0: Strip leading and trailing whitespace

RANDOM_SEED

Seed the Python random module to recreate a previous test stimulus. At the beginning of every test a message is displayed with the seed used for that execution:

INFO     cocotb.gpi                                  __init__.py:89   in _initialise_testbench           Seeding Python random module with 1377424946

To recreate the same stimuli use the following:

make RANDOM_SEED=1377424946

See also: PLUSARGS

COCOTB_ANSI_OUTPUT

Use this to override the default behavior of annotating cocotb output with ANSI color codes if the output is a terminal (isatty()).

COCOTB_ANSI_OUTPUT=1

forces output to be ANSI-colored regardless of the type of stdout or the presence of NO_COLOR

COCOTB_ANSI_OUTPUT=0

suppresses the ANSI color output in the log messages

NO_COLOR

From http://no-color.org,

All command-line software which outputs text with ANSI color added should check for the presence of a NO_COLOR environment variable that, when present (regardless of its value), prevents the addition of ANSI color.

COCOTB_REDUCED_LOG_FMT

Defaults internally to 1. If the value is 1, log lines displayed in the terminal will be shorter. It will print only time, message type (INFO, WARNING, ERROR, …) and the log message itself. Set to 0 if you wish to have the full format message.

COCOTB_ATTACH

In order to give yourself time to attach a debugger to the simulator process before it starts to run, you can set the environment variable COCOTB_ATTACH to a pause time value in seconds. If set, cocotb will print the process ID (PID) to attach to and wait the specified time before actually letting the simulator run.

COCOTB_ENABLE_PROFILING

Enable performance analysis of the Python portion of cocotb. When set, a file test_profile.pstat will be written which contains statistics about the cumulative time spent in the functions.

From this, a callgraph diagram can be generated with gprof2dot and graphviz.

COCOTB_LOG_LEVEL

The default logging level to use. This is set to INFO unless overridden. Valid values are TRACE, DEBUG, INFO, WARNING, ERROR, CRITICAL.

TRACE is used for internal low-level logging and produces very verbose logs.

COCOTB_RESOLVE_X

Defines how to resolve bits with a value of X, Z, U or W when being converted to integer. Valid settings are:

VALUE_ERROR

raise a ValueError exception

ZEROS

resolve to 0

ONES

resolve to 1

RANDOM

randomly resolve to a 0 or a 1

Set to VALUE_ERROR by default.

MEMCHECK

HTTP port to use for debugging Python’s memory usage. When set to e.g. 8088, data will be presented at http://localhost:8088.

This needs the cherrypy and dowser Python modules installed.

LIBPYTHON_LOC

The absolute path to the Python library associated with the current Python installation; i.e. libpython.so or python.dll on Windows. This is determined with cocotb-config --libpython in cocotb’s makefiles.

Regression Manager

MODULE

The name of the Python module(s) to search for test functions - if your tests are in a file called test_mydesign.py, MODULE would be set to test_mydesign. Multiple modules can be specified using a comma-separated list. All tests will be run from each specified module in order of the module’s appearance in this list.

The is the only environment variable that is required for cocotb, all others are optional.

TESTCASE

The name of the test function(s) to run. If this variable is not defined cocotb discovers and executes all functions decorated with the cocotb.test decorator in the supplied MODULE list.

Multiple test functions can be specified using a comma-separated list.

COCOTB_RESULTS_FILE

The file name where xUnit XML tests results are stored. If not provided, the default is results.xml.

Added in version 1.3.

COVERAGE

Enable to report Python coverage data. For some simulators, this will also report HDL coverage.

This needs the coverage Python module to be installed.

COCOTB_PDB_ON_EXCEPTION

If defined, cocotb will drop into the Python debugger (pdb) if a test fails with an exception. See also the Python subsection of Attaching a Debugger.

Scheduler

COCOTB_SCHEDULER_DEBUG

Enable additional log output of the coroutine scheduler.

GPI

GPI_EXTRA

A comma-separated list of extra libraries that are dynamically loaded at runtime. A function from each of these libraries will be called as an entry point prior to elaboration, allowing these libraries to register system functions and callbacks. Note that HDL objects cannot be accessed at this time. An entry point function must be named following a : separator, which follows an existing simulator convention.

For example:

  • GPI_EXTRA=libnameA.so:entryA,libnameB.so:entryB will first load libnameA.so with entry point entryA , then load libnameB.so with entry point entryB.

Changed in version 1.4.0: Support for the custom entry point via : was added. Previously : was used as a separator between libraries instead of ,.

Changed in version 1.5.0: Library name must be fully specified. This allows using relative or absolute paths in library names, and loading from libraries that aren’t prefixed with “lib”. Paths should not contain commas.

PyGPI

Warning

PyGPI is an experimental feature and subject to change.

PYGPI_ENTRY_POINT

The Python module and callable that starts up the Python cosimulation environment. This defaults to cocotb:_initialise_testbench, which is the cocotb standard entry point. User overloads can be used to enter alternative Python frameworks or to hook existing cocotb functionality. The variable is formatted as path.to.entry.module:entry_point.function. The string before the colon is the Python module to import and the string following the colon is the object to call as the entry function.

The entry function must be a callable matching this form:

  • entry_function(argv: List[str]) -> None

The entry module must have the following additional functions defined. These additional requirements on the entry module may be relaxed over time.

  • _sim_event(message: str) -> None

  • _log_from_c(logger_name: str, level: int, filename: str, lineno: int, msg: str, function_name: str)) -> None

  • _filter_from_c(logger_name: str, level: int) -> bool

Changed in version 1.8: level argument to _sim_event is no longer passed, it is assumed to be SIM_FAIL (2).

Makefile-based Test Scripts

The following variables are makefile variables, not environment variables.

GUI

Set this to 1 to enable the GUI mode in the simulator (if supported).

SIM

Selects which simulator Makefile to use. Attempts to include a simulator specific makefile from cocotb/share/makefiles/simulators/makefile.$(SIM)

WAVES

Set this to 1 to enable wave traces dump for the Aldec Riviera-PRO, Mentor Graphics Questa, and Icarus Verilog simulators. To get wave traces in Verilator see Waveforms.

TOPLEVEL_LANG

Used to inform the makefile scripts which HDL language the top-level design element is written in. Currently it supports the values verilog for Verilog or SystemVerilog tops, and vhdl for VHDL tops. This is used by simulators that support more than one interface (VPI, VHPI, or FLI) to select the appropriate interface to start cocotb.

The variable is also made available to cocotb tests conveniently as cocotb.LANGUAGE.

VHDL_GPI_INTERFACE

Explicitly sets the simulator interface to use when TOPLEVEL_LANG is vhdl. This includes the initial GPI interface loaded, and GPI_EXTRA library loaded in mixed language simulations. Valid values are vpi, vhpi, or fli. Not all simulators support all values; refer to the Simulator Support section for details.

Setting this variable is rarely needed as cocotb chooses a suitable default value depending on the simulator used.

VERILOG_SOURCES

A list of the Verilog source files to include. Paths can be absolute or relative; if relative, they are interpreted as relative to the location where make was invoked.

VERILOG_INCLUDE_DIRS

A list of the Verilog directories to search for include files. Paths can be absolute or relative; if relative, they are interpreted as relative to the location where make was invoked.

VHDL_SOURCES

A list of the VHDL source files to include. Paths can be absolute or relative; if relative, they are interpreted as relative to the location where make was invoked.

VHDL_SOURCES_<lib>

A list of the VHDL source files to include in the VHDL library lib (currently for GHDL/ModelSim/Questa/Xcelium/Incisive/Riviera-PRO only).

VHDL_LIB_ORDER

A space-separated list defining the order in which VHDL libraries should be compiled (needed for ModelSim/Questa/Xcelium/Incisive, GHDL determines the order automatically).

COMPILE_ARGS

Any arguments or flags to pass to the compile (analysis) stage of the simulation.

SIM_ARGS

Any arguments or flags to pass to the execution of the compiled simulation.

RUN_ARGS

Any argument to be passed to the “first” invocation of a simulator that runs via a TCL script. One motivating usage is to pass -noautoldlibpath to Questa to prevent it from loading the out-of-date libraries it ships with. Used by Aldec Riviera-PRO and Mentor Graphics Questa simulator.

EXTRA_ARGS

Passed to both the compile and execute phases of simulators with two rules, or passed to the single compile and run command for simulators which don’t have a distinct compilation stage.

PLUSARGS

“Plusargs” are options that are starting with a plus (+) sign. They are passed to the simulator and are also available within cocotb as cocotb.plusargs. In the simulator, they can be read by the Verilog/SystemVerilog system functions $test$plusargs and $value$plusargs.

The special plusargs +ntb_random_seed and +seed, if present, are evaluated to set the random seed value if RANDOM_SEED is not set. If both +ntb_random_seed and +seed are set, +ntb_random_seed is used.

SIM_CMD_PREFIX

Prefix for simulation command invocations.

This can be used to add environment variables or other commands before the invocations of simulation commands. For example, SIM_CMD_PREFIX := LD_PRELOAD="foo.so bar.so" can be used to force a particular library to load. Or, SIM_CMD_PREFIX := gdb --args to run the simulation with the GDB debugger.

Added in version 1.6.0.

SIM_CMD_SUFFIX

Suffix for simulation command invocations. Typically used to redirect simulator stdout and stderr:

# Prints simulator stdout and stderr to the terminal
# as well as capture it all in a log file "sim.log".
SIM_CMD_SUFFIX := 2>&1 | tee sim.log

Added in version 1.9.

COCOTB_HDL_TIMEUNIT

The default time unit that should be assumed for simulation when not specified by modules in the design. If this isn’t specified then it is assumed to be 1ns. Allowed values are 1, 10, and 100. Allowed units are s, ms, us, ns, ps, fs.

Added in version 1.3.

COCOTB_HDL_TIMEPRECISION

The default time precision that should be assumed for simulation when not specified by modules in the design. If this isn’t specified then it is assumed to be 1ps. Allowed values are 1, 10, and 100. Allowed units are s, ms, us, ns, ps, fs.

Added in version 1.3.

CUSTOM_COMPILE_DEPS

Use to add additional dependencies to the compilation target; useful for defining additional rules to run pre-compilation or if the compilation phase depends on files other than the RTL sources listed in VERILOG_SOURCES or VHDL_SOURCES.

CUSTOM_SIM_DEPS

Use to add additional dependencies to the simulation target.

SIM_BUILD

Use to define a scratch directory for use by the simulator. The path is relative to the location where make was invoked. If not provided, the default scratch directory is sim_build.

SCRIPT_FILE

The name of a simulator script that is run as part of the simulation, e.g. for setting up wave traces. You can usually write out such a file from the simulator’s GUI. This is currently supported for the Mentor Questa, Mentor ModelSim and Aldec Riviera simulators.

TOPLEVEL_LIBRARY

The name of the library that contains the TOPLEVEL module/entity. Only supported by the Aldec Riviera-PRO, Aldec Active-HDL, and Siemens EDA Questa simulators.

Library Build Process

You can pass additional options to the library build process (which is usually happening as part of the installation with pip) using the conventional variables for C and C++ compilation and linking: CFLAGS, CPPFLAGS, and LDFLAGS.

Internal Variables

The following variables are used for cocotb internals. They may change at any time, and users should not rely on them.

COCOTB_PY_DIR

Path to the directory containing the cocotb Python package in the cocotb subdirectory.

COCOTB_SHARE_DIR

Path to the directory containing the cocotb Makefiles and simulator libraries in the subdirectories lib, include, and makefiles.

COCOTB_LIBRARY_COVERAGE

Enable code coverage collection for cocotb internals. When set, a file .coverage.cocotb will be written which contains statistics about the code coverage. This is mainly useful for cocotb’s own Continuous Integration setup.